航空发动机进气支板电热防冰试验

为了研究电加热防冰的效果,开展了小型航空发动机进气支板的电加热防冰试验。结合该型号发动机进气支板的结构特点,设计了3种电热防冰加热布置方式,分别在支板沿轴向的不同位置采用1~3个电加热棒作为防冰热源。通过模拟不同的发动机进气结冰环境参数和电加热功率,在冰风洞中对3种电加热方式进行了防冰试验研究。通过布置在支板外表面的温度测点记录了防冰过程中支板表面的瞬态温度变化,分析了支板防冰过程中表面温度的变化特点。防冰试验研究了热源总功率、热源布置方式、液态水含量以及来流温度对支板防冰性能的影响。试验结果表明,合理的电加热方式可以取得较好的防冰效果,同时避免支板后部的溢流水结冰。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

Aerothermodynamic and stability analyses of a deployable re-entry capsule

Recent research projects, in the field of atmospheric re-entry technology, are focused on the design of deployable, umbrella-like Thermal Protection Systems (TPSs). These TPSs are made of flexible high temperature resistant fabrics, folded at launch and deployed in space for de-orbit and re-entry operations. In the present paper two possible sphere–cone configurations for the TPS have been investigated from an aerodynamic point of view. The analyzed configurations are characterized by the same reentry mass and maximum diameter, but have different half-cone angles (45° and 60°). The analyses involve both the evaluation of thermal and aerodynamic loads and the assessment of the capsule longitudinal stability. The aerothermodynamic analysis has been performed for the completely deployed heat shield in transitional and continuum regimes, while the longitudinal stability has been analyzed in free molecular, transitional and continuum regimes, also taking into consideration the heat shield deployment sequence at high altitudes.     

改进的电热除冰系统的仿真方法

建立了电热除冰系统矩形微段的二维简化物理模型，采用焓法模型建立相变导热问题的微分控制方程，用控制容积法对该模型的控制方程及其边界、初始条件进行离散，使用块修正技术对原有的离散方程组的求解方法进行了改进，得到各个时刻的温度分布及冰的融解情况。计算结果与国外文献结果吻合，验证了改进的算法和程序的正确性。并计算分析了时间步长的选择、网格的划分对计算结果的影响。     

烧结双多孔介质中沸腾换热的实验研究

对由铜粉烧结而成的三种双多孔介质结构进行了沸腾换热的实验。为了便于比较，同时对两种单多孔介质进行了沸腾换热实验。结果发现：当双多孔介质的微孔径和单多孔介质的孔径相同时，双多孔介质的换热系数和临界热流密度比单多孔介质高得多；对于同样微孔径的双多孔介质，存在最佳的粗孔径，其换热系数和临界热流密度最大；当逆静水压头减小的时候，换热系数和临界热流密度增加。     

国外新型热作模具钢及其热处理工艺

主要叙述了H13、QRO80M、QRO90SUPREME等新型热作模具钢的性能、使用特点及其热处理工艺技术方法。     

液体火箭发动机涡轮泵用机械密封温度场及热载变形研究

基于ANSYS数值计算软件,建立了液体火箭发动机涡轮泵用机械密封的二维稳态传热模型,依靠经验公式确定了模型的对流换热系数。计算了密封环的温度场和热载变形,分析了密封端面比压、回流流量以及不同材质对密封温度场的影响规律。结果表明:密封端面最高温度发生在靠近密封环内径处,且密封端面比压越大密封环温度梯度越大;密封环热载变形呈收敛间隙,最大变形发生在动环端面的外径处,其值约为2.2μm;密封环端面最高温度随回流流量增加而减小,当回流流量从0.1~0.6 kg/s变化时,密封环端面最高温度可降低18%(从100℃降至82℃);当回流流量增大到0.3 kg/s时,继续提高对密封环端面温升的控制不再显著;采用高导热系数的摩擦副材料能够显著降低端面温升和温度梯度,提高密封工作可靠性。     

扩展型面排孔气膜冷却的实验研究

本文设计了三种型面的气膜孔扩展结构，研究了气膜冷却效率、壁面换热系数及流量系数随吹风比的变化规律。研究结果表明，与典型的圆柱形气膜孔相比，有后向扩展型面的气膜孔具有相对较高的冷却效率和换热系数，流量系数略有降低。扩展型面的流向扩展角α对冷却效率和换热系数的影响大于侧向扩展角 的影响。侧向扩展角 只在特定吹风比下才对提高气膜的侧向覆盖率、进而提高气膜冷却效率起作用，它使得位于二次流出流下游的低压区域范围增大，流量系数减小。     

HFC134a喷雾闪蒸冷却换热特性的实验研究

喷雾闪蒸冷却由于可以在较小的工质流量下实现很高的散热能力,在高热流密度散热、航天器热控和热防护等领域具有广阔的应用前景。本文建立了喷雾闪蒸冷却实验系统,对环境压力下以HFC134a为工质的喷雾闪蒸冷却换热特性进行了实验研究,得出了喷雾闪蒸冷却的换热特性曲线、临界热流密度(critical heat flux,CHF)以及被冷却表面温度随喷雾高度和流量的变化曲线,分析了适用于热控的最佳喷雾高度和流量。     

高超声速飞行器气动热耗散、输运及转换技术研究进展

针对高超声速飞行器面临的严重气动热集中、累积和时变问题,从气动热耗散、输运和转换三个方面,分别论述了被动热耗散材料、结构和主动热耗散技术,基于高导热材料、热管和工质对流的热输运技术,以及再生转换和热电转换技术的研究现状及其在高超声速飞行器上的应用案例,提出了上述技术在面临高超声速气动热时存在的问题。最后,针对高超声速飞行器气动热耗散、输运和转换技术的发展趋势进行了展望。